Welcome to Menno ...

The city of Menno is located in Hutchinson County<1>.

We aren't confident of the location of Menno, so consider the above location as an estimate.<2>

The pronunciation of Menno: MEH-noh<3>

While we don't have a date for the founding of Menno, you might get a feel for it by knowing that during our research the earliest mention that we found (so far) was in a book dated 1895.

From the Census Estimates for 2019, Menno has a population of 614 people<4> (see below for details).

Menno is 1,330 feet [405 m] above sea level.<5>.

Time Zone: Menno lies in the Central Time Zone (CST/CDT) and observes daylight saving time

Menno is located in the (605) area code.

The ZIP code for Menno: 57045<6>

Population Details ...

Taken from the 2019 Census Estimates, Menno had an population of 614 people. This is an increase of 0.99% since the 2010 Census (or a decrease of 15.78% since the 2000 Census).

At the time of the 2010 Census, Menno had a population of 608 people (which is 8.28% of the total population of Hutchinson County). This makes Menno the county's 4th most populous community.

The population of Menno represents 0.07% of the population of South Dakota (which has 814,180 people), making it the state's 133rd most populous community.

With a 2010 count of 608 people, the population of Menno decreased 16.6% from the 2000 Census (which had a count of 729 people).

More information can be found on the Census Page for Menno.

Communities Also Named Menno ...

Using our Gazetteer, we found that there are 3 communities that are also named Menno - they are located in Kansas (2) and Pennsylvania.

For more information, see our Tidbits & Trivia Page for Menno.

Communities near Menno ...

We have created a list of 10 communities that are near Menno.

Freeman
(10 miles [16.1 km] to the northeast)
- Jump to our Gazetteer entry for Freeman
- Freeman is located in Hutchinson County
- Population from the 2020 Census: 1,255 people
- Jump to TripAdvisor's Tourism page for Freeman <7>
Scotland
(9 miles [14.5 km] to the southwest)
- Note: The GPS coordinates that we are using for Scotland have been provided by the GNIS.<8> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Scotland
- Scotland is located in Bon Homme County
- Population from the 2020 Census: 792 people
- Jump to TripAdvisor's Tourism page for Scotland <7>
Tripp
(19 miles [30.6 km] to the west)
- Jump to our Gazetteer entry for Tripp
- Tripp is located in Hutchinson County
- Population from the 2020 Census: 614 people
- Jump to TripAdvisor's Tourism page for Tripp <7>
Jamesville
(10 miles [16.1 km] to the southeast)
- Note: The GPS coordinates that we are using for Jamesville have been provided by the GNIS.<8> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Jamesville
- Jamesville is located in Yankton County
- Estimated population in 2014: 232 people
Mayfield
(16 miles [25.7 km] to the southeast)
- Jump to our Gazetteer entry for Mayfield
- Mayfield is located in Yankton County
- Estimated population in 2014: 208 people
Wolf Creek
(7 miles [11.3 km] to the north)
- Note: The GPS coordinates that we are using for Wolf Creek have been provided by the GNIS.<8> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Wolf Creek
- Wolf Creek is located in Hutchinson County
- Estimated population in 2014: 195 people
Kaylor
(13 miles [20.9 km] to the west)
- Jump to our Gazetteer entry for Kaylor
- Kaylor is located in Hutchinson County
- Estimated population in 2014: 172 people
- Jump to TripAdvisor's Tourism page for Kaylor <7>
Spring Valley
(15 miles [24.1 km] to the east)
- Note: The GPS coordinates that we are using for Spring Valley have been provided by the GNIS.<8> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Spring Valley
- Spring Valley is located in Turner County
Lesterville
(13 miles [20.9 km] to the south)
- Note: The GPS coordinates that we are using for Lesterville have been provided by the GNIS.<8> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Lesterville
- Lesterville is located in Yankton County
- Population from the 2020 Census: 130 people
- Jump to TripAdvisor's Tourism page for Lesterville <7>
Milltown
(17 miles [27.4 km] to the northwest)
- Jump to our Gazetteer entry for Milltown
- Milltown is located in Hutchinson County
- Estimated population in 2014: 115 people

To Help With Your Genealogy Research ...

We have a couple of sections for those tracing their genealogy.

We created a list of cemeteries that are in the area around Menno. Our list includes the location of those cemeteries and we provide an overhead view. See our Cemetery List for Menno.

Using the information from an 1895 Atlas, we've created a list of communities that were in the area of Menno. Our list includes information such as whether the 1895 community had a post office or railroad service. See our List of 1890's Communities around Menno.

We also have a detailed list of newspapers that have been published in the area around Menno. See our Newspapers Page for Menno.

TripAdvisor Tourism Pages for Menno ...

Looking for more information about Menno? A wonderful source is the TripAdvisor website. We always start with the TripAdvisor Tourism page, where you can read an overview with links that will help you find lodging, restaurants and attractions.

In addition to the Tourism page for Menno, there are neighboring communities that also have Tourism pages. More information about those communities can be found on our TripAdvisor Page for Menno.

Adding Menno to Our Gazetteer ...

We originally found mention of Menno in both the FIPS-55 and the GNIS. For more information, see the FIPS and GNIS Codes sections on our Miscellaneous Page.

From our notes, the earliest published mention we've found for Menno was in the book titled Business Atlas and Shippers' Guide (1895).

We also found Menno on a map titled Rand McNally Map of South Dakota (1937).

For more details, see References and Mentions for Menno.

Off-the-Road Links ...

Unfortunately, we don't know of a website for Menno. If you can help, please contact us through our Feedback Page.

The official website for State of South Dakota: sd.gov/

Footnotes ...

<1>	If you're interested in how the shape of South Dakota's counties, including Hutchinson, have changed over time, we recommend the Atlas of Historical County Boundaries.
<2>	An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace.
<3>	The pronunciation we've provided is our attempt to give a phonetic pronunciation for Menno. While it might not be exactly right, hopefully it will be close. If we have it wrong or there's a better way to pronounce the name, please contact us through our Feedback Page.
<4>	Population counts have been provided by the U.S. Census Bureau. For more detail, please visit our Census Page for Menno.
<5>	The elevation is an estimate for the area around Menno - it will be higher in some places and lower in others.
<6>	ZIP Codes have been created by the United States Postal Service (USPS) as a way of grouping addresses to make delivery more efficient. The boundaries of the ZIP Code can be changed, re-assigned, eliminated or overlapped with other ZIP Codes. So keep in mind that any given ZIP Code is only 'loosely' associated with a city (such as Menno). When looking for a ZIP Code, whether Menno or elsewhere, it's always best to check the website of the United States Postal Service (USPS).
<7>	While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program.
<8>	The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required.