Miscellaneous Information

Various Identification Codes ...

GNIS Codes ...

The U.S. Board on Geographic Names (BGN) was created to address the problems caused by spelling and naming variations. The BGN will usually recognize an existing name or, when necessary, chose a name for a geographic feature (such as a mountain, lake, river, stream, city, town, village, dam, bridge, etc).

The BGN names are kept in a database called the Geographic Names Information System (GNIS) and it is the official Federal repository. The GNIS is operated and maintained by the U.S. Geological Survey (USGS).

A unique and permanent code has been assigned for each name in the GNIS database. These names and identifiers are definitive and it is intended that they are to be used by all departments of the Federal Government:

GNIS ID for Fairview: 2406481

GNIS ID for Union County: 1008590

GNIS ID for North Carolina: 1027616

FIPS Codes ...

In a past effort, various federal agencies created a set of codes with a purpose similar to the GNIS codes. These codes are called the Federal Information Processing Standard (or the FIPS 55 codes). Although they are still used by some organizations, the FIPS codes are obsolete and will ultimately be replaced by the GNIS codes.

The following FIPS codes apply to Fairview:

Place (Community) Code:	22500
State Code:	37 (North Carolina)
County Code:	179 (Union County)

Since the Place and County FIPS codes are not unique and can be repeated in other States, it's necessary to combine the State code with the Place and County FIPS codes to uniquely identify them - for example:

State/Place Code:	37/22500
State/County Code:	37/179

As already mentioned, the FIPS codes are to be replaced by the GNIS codes. The following reflect those changes:

	FIPS Code	translates to	GNIS Code
State of North Carolina:	37		1027616
Union County:	37/179		1008590
Fairview:	37/22500		2406481

GPS Location - GNIS vs Census ...

An important aspect of the GNIS code is that it assigns a GPS location (the latitude/longitude) to the geographic feature. This location is simply a point on the map and does not represent the size or shape of the feature. In the case of Fairview, it is a point within Fairview that might be a post office, the city hall or simply an intersection - the point should really be considered arbitrary and only indicating a general location.

For Fairview, the GNIS GPS location is given as:

Lat:   35° 9' 16"   (or 35.15°)

Lon:   -80° 32' 4"   (or -80.53°)  

Determined by its statistical needs, the Census Bureau has defined a sampling area for Fairview - this area also contains a map point. As with the GNIS code, the location of the Census point should be considered as being arbitrary within the sampling area.

For Fairview, the Census 2010 GPS location is given as:

Lat:   35° 9' 49"   (or 35.16°)

Lon:   -80° 31' 32"   (or -80.53°)  

The map point defined by the Census Bureau lies 4,329 feet to the northeast<1> of the point given by the GNIS (see above).

Regional Codes ...

For statistical purposes, the US Census Bureau has divided the country into four Regions. Fairview is located in Region #3 (the South Region).

In turn, the US Census Bureau has further divided each Region into Divisions. Fairview is located in Division #5 (the South Atlantic Division).

The Office of Management and Budget (OMB) has created ten Federal Regions. Fairview is located in Region IV (Region 4).

The Federal Emergency Management Agency (FEMA) has created ten Management Regions. Fairview is located in Region IV (Region 4).

Referenced GNIS Records ...

GNIS ID #1024890   (Name of Record: Fairview)

Class: populated place

A place or area having clustered or scattered buildings and a permanent population (such as a city, settlement, town or village). The boundaries may or may not coincide with the perceived population.

A 'populated place' record may have a corresponding 'census' or 'civil' record. The information contained in the 'populated place' record applies only to the class and should not be confused with either the 'census' and 'civil' classes.

County: Union

Map Name: Midland

Lat: 35.1384791       Lon: -80.5375668  

Elev: 161 ft.

GNIS ID #2406481   (Name of Record: Town of Fairview)

Class: civil

A political division formed for administrative purposes (such as a borough, county, incorporated place, parish, town or township).

A 'civil' record may have a corresponding 'census' or 'populated place' record. The information contained in the 'civil' record applies only to the class and should not be confused with either the 'census' and 'populated place' classes.

County: Union

Map Name: Midland

Lat: 35.1544718       Lon: -80.534521  

Elev: 147 ft.

Referenced FIPS Records ...

FIPS Code: 37/22500   (Place Name: Fairview)

County: Union     (FIPS State/County: 37/179)

Class: U6

Identifies a populated place (ie- Fairview) that is wholly or substantially located outside the boundaries of any incorporated place or CDP (Census Designated Place) that has an authoritative common name recognized by the U.S. Geological Survey (USGS).

MSA Code: 1520

Off-the-Road Links ...

Unfortunately, we don't know of a website for Fairview. If you can help, please contact us through our Feedback Page.

The official website for Union County: www.co.union.nc.us/

The official website for State of North Carolina: https://www.nc.gov/

The official website of the U.S. Board on Geographic Names (BGN)

The official website of the U.S. Geological Survey (USGS)

The official website of the U.S. Census Bureau

The official website of the U.S. Office of Management and Budget (OMB)

The official website of the U.S. Federal Emergency Management Agency (FEMA)