RoadsideThoughts
A Gazetteer for the United States and Canada
Home >> State of North Carolina >> Union County >> Fairview >> Census DataIndex...










Learn About
The Commemorative
Quarter for
North Carolina


The Commemorative Quarter for North Carolina







Census Data for Fairview

Population ...

The most recent Census Estimate<1> was for 2019 and it gave Fairview a population of 3,907 people.

The last Decennial Census<2> was in 2010, which gave Fairview a population of 3,324 people.

The town of Fairview is located in Union County. The 2010 Census gave Union County; a population of 201,292 people. This means that Fairview had 1.65% of the county's total population, making it Union's 10th most populous community.

At the same time, North Carolina had a population of 9,535,483 people, meaning that Fairview had 0.03% of the total population of North Carolina - making it the state's 187th most populous community.

Area ...

The 2010 Census shows that the sampling area for Fairview has a total area of 30.28 square miles [78.4 km²]. Of this total, 29.92 square miles [77.5 km²] is land, with the balance (1.19%) being water (0.36 square miles [0.9 km²]).

Union County has a land area of 631 square miles [1,635.6 km²]. At 29.92 square miles [77.5 km²], Fairview has 4.74% of the county's total land area.

  • Continue Reading ...
    • When the Census Bureau conducts a census for a town like Fairview, they draw a boundary around the area in which they are going to conduct their count - this defines the sampling area (usually a polygon). The shape of the sampling area can be quite complex and it's important to keep in mind that the boundaries of the sampling area may or may not match the recognized boundaries of the town.
    • Things like population, area and housing for Fairview reflect the sampling area. Since the shape of the sampling area and the actual boundaries of Fairview might be different, it's best to check with the U.S. Census Bureau to resolve any difference between the two.
    • Not only does the sampling area define boundaries, it also has a GPS location (latitude & longitude) that indicates a point within the sampling area (usually the center of the polygon, known as the centroid). At the time of the 2010 Census, the sampling area was located at:
    • Lat:   35° 9' 49"   (or 35.16°)
    • Lon:   -80° 31' 32"   (or -80.53°)

Housing Units ...

At the time of the 2010 Census, Fairview had 1,302 Housing Units<3> and with its population of 3,324 people, this averages 2.55 people per Housing Unit.

  • Continue Reading ...
    • The 2010 Census shows Fairview had a land area of 29.92 square miles [77.5 km²]. This translates to 42.99 Housing Units per square mile [16.6 housing units/km²].

Union County ...

The community of Fairview is located in Union County<4>.

The county had a population of 201,292 people at the 2010 Census. With it's population of 3,324 people, Fairview represented 1.65% of the county's total.

In addition, where the town of Fairview has a population density of 109.8 people per square mile [42.38 people/km²], Union County averages 318.7 people per square mile [123.1 people/km²].

For more information, please visit our Census Page for Union County.

Census-to-Census Observations ...

Introduction ...

When the Census Bureau takes a census count (or enumeration) for Fairview, they start by specifying the boundaries of the area to be counted. This area (or sampling area) is a polygon and its shape can be quite complex - it may or may not match the geographical boundaries of Fairview. It's important to note that from one Census to the next, the shape and location of the polygon can change.

  • Continue Reading ...
    • Although we don't have specific information about the shape of the polygon for Fairview or how it changed has over time, there is some information that can give us some hints. For example, since the shape of the sampling area is directly related to the shape of the polygon, any change to area probably indicates a new shape for the polygon.
    • If you need precision or details about the methodology of the Census, you should visit the U.S. Census Bureau for a definitive answer.

Location ...

While generally coinciding with the GPS location (latitude/longitude) of Fairview, the latitude and longitude given by the Census Bureau actually indicates the GPS location of the polygon for Fairview.

  • Continue Reading ...
    • For the 2010 Censuses, the location was given as:
    • Lat:   35.163820°   (or 35°9'49" N)

      Lon:   -80.525562°   (or -80°31'32" W)

    • The U.S. Geological Survey (USGS) and the U.S. Board on Geographic Names (BGN) have assigned a unique GNIS identifier (#2406481) to Fairview. This identifier also marks a GPS point on the map, and that point lies within the boundaries of Fairview. The GNIS point has been mapped to the latitude/longitude:
    • Lat:   35.154472°   (or 35°9'16" N)
    • Lon:   -80.534521°   (or -80°32'4" W)
    • The GPS location given for the 2010 Census lies 4,329 feet to the northeast<5> of the point given by the GNIS for Fairview. For more information about this and the relationship of the various Federal Codes, please visit our Misc Page for Fairview.

Miscellaneous Information for Fairview ...

The Federal government has assigned various identifying codes to each community, county and state. At one time or another, the US Census Bureau has used one (or more) of the following identifiers when referring to either Union County or the town of Fairview:

  • The GNIS Codes ...
    • The current system of identification is called the Geographic Names Information System (GNIS). The following GNIS codes relate to Fairview:
    • GNIS ID for Fairview: 2406481
    • GNIS ID for Union County: 1008590
    • GNIS ID for State of North Carolina: 1027616
  • Misc. Census Codes ...
    • Fairview is located in Census Region #3 (the South Region) and Division #5 (the South Atlantic Division).

For more information about the various Federal identification codes, please visit our Misc Page for Fairview.

Unfortunately, we don't know of a website for Fairview. If you can help, please contact us through our Feedback Page.

The official website for Union County: www.co.union.nc.us/

The official website for State of North Carolina: https://www.nc.gov/

The official website of the U.S. Census Bureau

The official website of the U.S. Board on Geographic Names (BGN)

The official website of the U.S. Geological Survey (USGS)

Footnotes ...

<1>Every year, the US Census Bureau creates a population estimate for the preceeding year. Keep in mind that this value is an estimate and not an actual count. The most recent Census estimate is for the year 2019.
<2>Every 10 years (eg- 1990, 2000, 2010), the US Census Bureau conducts a Constitutionally-mandated count (or enumeration) of people living within the United States. This count is called a Decennial Census. The last Decennial Census was the 2010 Census, with the next one planned for 2020.
<3>A Housing Unit is a broad term for those places where people live (whether occupied or temporarily vacant), such as a house, an apartment, a mobile home, or an area that is considered as a separate living quarter. Separate living quarters (consisting of one or more rooms) are considered to be those places where people live, sleep and eat separately from others and that have access to the outside (either directly or by a shared hallway).
<4>If you're interested in how the shape of North Carolina's counties, including Union, have changed over time, we recommend the Atlas of Historical County Boundaries.
<5>The calculated bearing (or angle) to the GNIS point is 321 degrees and a distance of 4,329 feet.









 

Copyright 2024
All Rights Reserved

Thank you for visiting our website.

In closing, please keep in mind that we can not guarantee the accuracy or timeliness of the information on this website, so use with care. We encourage you to double-check the information that is critical to you.

If you've found an error or have additional information that you would like to share, please don't hesitate to write: Click here to contact us.

This page was last modified/updated: 10 Mar 2024