RoadsideThoughts
A Gazetteer for the United States and Canada
Home >> State of Georgia >> Wilkinson County >> McIntyreIndex...










Learn About
The Commemorative
Quarter for
Georgia


The Commemorative Quarter for Georgia







Welcome to McIntyre ...

The town of McIntyre is located in Wilkinson County<1>.


The location of McIntyre has been provided by the Geographic Names Information System (ie- the GNIS).<2>


While we don't have a date for the founding of McIntyre, you might get a feel for it by knowing that during our research the earliest mention that we found (so far) was in a book dated 1895.

From the  Census Estimates for 2019, McIntyre has a population of 605 people<3> (see below for details).

McIntyre is 250 feet [76 m] above sea level.<4>.

Time Zone: McIntyre lies in the Eastern Time Zone (EST/EDT) and observes daylight saving time

McIntyre is within the boundaries of the (478) area code.

The ZIP code for McIntyre: 31054<5>

Population Details ...

Taken from the 2019 Census Estimates, McIntyre had an population of 605 people. This is a decrease of 6.92% since the 2010 Census.

At the time of the 2010 Census, McIntyre had a population of 650 people (which is 6.8% of the total population of Wilkinson County). This makes McIntyre the county's 3rd most populous community.

More information can be found on the Census Page for McIntyre.

Communities Also Named McIntyre ...

Using our Gazetteer, we found that there are 11 communities that are also named McIntyre - they are located in Florida, Louisiana, Maryland, Michigan, Mississippi, New York, Ohio, Ontario (2), Pennsylvania and Utah.

For more information, see our Tidbits & Trivia Page for McIntyre.

Communities near McIntyre ...

We have created a list of 10 communities that are near McIntyre.

  • Milledgeville
    (16 miles [25.7 km] to the north)
  • The Colony
    (10 miles [16.1 km] to the north)
    • Note: The GPS coordinates that we are using for The Colony have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for The Colony
    • The Colony is located in Baldwin County
    • Estimated population in 2019: 1,834 people
  • Gordon
    (8 miles [12.9 km] to the west)
    • Jump to our Gazetteer entry for Gordon
    • Gordon is located in Wilkinson County
    • Population from the 2020 Census: 1,819 people
    • Jump to TripAdvisor's Tourism page for Gordon <6>
  • Jeffersonville
    (13 miles [20.9 km] to the southwest)
    • Note: The GPS coordinates that we are using for Jeffersonville have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Jeffersonville
    • Jeffersonville is located in Twiggs County
    • Population from the 2020 Census: 931 people
    • Jump to TripAdvisor's Tourism page for Jeffersonville <6>
  • Ivey
    (7 miles [11.3 km] to the northwest)
    • Note: The GPS coordinates that we are using for Ivey have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Ivey
    • Ivey is located in Wilkinson County
    • Population from the 2020 Census: 899 people
  • Toomsboro
    (7 miles [11.3 km] to the east)
    • Note: The GPS coordinates that we are using for Toomsboro have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Toomsboro
    • Toomsboro is located in Wilkinson County
    • Population from the 2020 Census: 478 people
    • Jump to TripAdvisor's Tourism page for Toomsboro <6>
  • Pitts
    (18 miles [29 km] to the west)
    • Note: The GPS coordinates that we are using for Pitts have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Pitts
    • Pitts is located in Jones County
    • Estimated population in 2019: 293 people
  • Oconee
    (14 miles [22.5 km] to the east)
    • Note: The GPS coordinates that we are using for Oconee have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Oconee
    • Oconee is located in Washington County
    • Population from the 2020 Census: 240 people
    • Jump to TripAdvisor's Tourism page for Oconee <6>
  • Danville
    (16 miles [25.7 km] to the south)
  • Gardner
    (13 miles [20.9 km] to the east)
    • Note: The GPS coordinates that we are using for Gardner have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Gardner
    • Gardner is located in Washington County
    • Estimated population in 2019: 201 people

To Help With Your Genealogy Research ...

We have a couple of sections for those tracing their genealogy.

We created a list of cemeteries that are in the area around McIntyre. Our list includes the location of those cemeteries and we provide an overhead view. See our Cemetery List for McIntyre.

Using the information from an 1895 Atlas, we've created a list of communities that were in the area of McIntyre. Our list includes information such as whether the 1895 community had a post office or railroad service. See our List of 1890's Communities around McIntyre.

We also have a detailed list of newspapers that have been published in the area around McIntyre. See our Newspapers Page for McIntyre.

TripAdvisor Tourism Pages for McIntyre ...

Looking for more information about McIntyre? A wonderful source is the TripAdvisor website. We always start with the TripAdvisor Tourism page, where you can read an overview with links that will help you find lodging, restaurants and attractions.

In addition to the Tourism page for McIntyre, there are neighboring communities that also have Tourism pages. More information about those communities can be found on our TripAdvisor Page for McIntyre.

Adding McIntyre to Our Gazetteer ...

We originally found mention of McIntyre in both the FIPS-55 and the GNIS. For more information, see the FIPS and GNIS Codes sections on our Miscellaneous Page.

From our notes, the earliest published mention we've found for McIntyre was in the book titled Business Atlas and Shippers' Guide (1895).

For more details, see References and Mentions for McIntyre.

Unfortunately, we don't know of a website for McIntyre. If you can help, please contact us through our Feedback Page.

The official website for State of Georgia: https://georgia.gov/

Footnotes ...

<1>If you're interested in how the shape of Georgia's counties, including Wilkinson, have changed over time, we recommend the Atlas of Historical County Boundaries.
<2>The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required.
<3>Population counts have been provided by the U.S. Census Bureau. For more detail, please visit our Census Page for McIntyre.
<4>The elevation is an estimate for the area around McIntyre - it will be higher in some places and lower in others.
<5>ZIP Codes have been created by the United States Postal Service (USPS) as a way of grouping addresses to make delivery more efficient. The boundaries of the ZIP Code can be changed, re-assigned, eliminated or overlapped with other ZIP Codes. So keep in mind that any given ZIP Code is only 'loosely' associated with a town (such as McIntyre). When looking for a ZIP Code, whether McIntyre or elsewhere, it's always best to check the website of the United States Postal Service (USPS).
<6>While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program.









 

Copyright 2024
All Rights Reserved

Thank you for visiting our website.

In closing, please keep in mind that we can not guarantee the accuracy or timeliness of the information on this website, so use with care. We encourage you to double-check the information that is critical to you.

If you've found an error or have additional information that you would like to share, please don't hesitate to write: Click here to contact us.

This page was last modified/updated: 10 Mar 2024